Product ID:1831 INSULATING OIL
MSDS Date:11/13/1992
FSC:9160
NIIN:00-075-9816
MSDS Number: BQDGT

EXXON COMPANY, USA, A DIV OF EXXON CORP.

800 BELL ST
HOUSTON, TX 77252-2180
US

Emergency Phone: 713-656-3424/2443 (MEDICAL)

Info Phone: 713-656-3631

Cage: DO850

OCTAGON PROCESS INC.

EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: >99.5% %

ACGIH TLV: 5 MG/M3 (OIL MIST)

PROPRIETARY ADDITIVES

Fraction By Weight: < 0.5% %

LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN IRRITATION, DERMATITIS, EYE
IRRITATION, ASPIRATION HAZARD
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT WITH THIS
PRODUCT TENDS TO REMOVE SKIN OILS, POSSIBLY LEADING TO IRRITATION
AND DERMATITIS. EYE IRRITATION. LUNG DAMAGE (DUE TO ASPIRATION).
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH CLEAR WATER FOR 15 MINUTES. IF IRRITATION
PERSISTS, CALL PHYSICIAN. SKIN: REMOVE CONTAMINATED CLOTHING AND
WASH SKIN WITH SOAP AND WATER. IF PRODUCT IS INJECTED INTO OR UNDER
SKIN, SE E PHYSICIAN. INHALATION: REMOVE FROM EXPOSURE. TREAT
SYMPTOMATICALLY. INGESTION: DO NOT INDUCE VOMITING. CALL A
PHYSICIAN IMMEDIATELY.

Flash Point Method:COC
Flash Point:293F,145C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:FOAM, WATER SPRAY, DRY CHEMICAL, CARBON DIOXIDE,
VAPORIZING LIQUID TYPE FIRE EXTINGUISHER
Fire Fighting Procedures:USE WATER TO KEEP CONTAINERS COOL. MINIMIZE
BREATHING OF GASES, VAPOR, FUMES OR DECOMPOSITION PRODUCTS. USE
SUPPLIED AIR BREATHING EQUIPMENT.
Unusual Fire/Explosion Hazard:IF A LEAK OR SPILL HAS NOT IGNITED, USE
WATER SPRAY TO DISPERSE THE VAPORS AND TO PROVIDE PROTECTION FOR
MEN ATTEMPTING TO STOP A LEAK.

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH OR OTHER
ABSORBENT TO SPILL AREA. MINIMIZE SKIN CONTACT. KEEP PRODUCT OUT OF
SEWERS AND WATERCOURSES. ADVISE PROPER AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE AND CAN BE DANGEROUS.
DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, CRIND OR EXPOSE
SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY OR OTHER
SOURCES OF IGNITION. THEY MAY EXPLODE.

Respiratory Protection:USE SUPPLIED AIR RESPIRATORY PROTECTION IN
CONFINED OR ENCLOSED SPACES, IF NEEDED.
Ventilation:USE LOCAL EXHAUST TO CAPTURE VAPOR, MIST OR FUMES, IF
NECESSARY. PROVIDE VENTIALTION SUFFICIENT TO PREVENT EXCEEDING TLV
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:CHEMICAL RESISTANT APRON OR OTHER IMPERVIOUS
CLOTHING
Work Hygienic Practices:CLEANSE SKIN THOROUGHLY AFTER CONTACT AND
BEFORE BREAKS AND MEALS AND AT THE END OF WORK PERIOD.
Supplemental Safety and Health
MINIMIZE BREATHING VAPOR, MIST OR FUMES. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN. REMOVE CONTAMINATED CLOTHING. LAUNDER OR
DRY-CLEAN BEFORE REUSE. REMOVE CONTAMINATED SHOES AND THOROUGHLY
CLEAN BEFORE REUSE; DISCARD IF OIL-SOAKED.

HCC:N1
Boiling Pt:B.P. Text:460F,238C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:< 0.01
Vapor Density:> 5
Spec Gravity:0.88
pH:7
Evaporation Rate & Reference:< 0.01(N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, WATER-WHITE LIQUID, MILD, BLAND PETROLEUM
ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS SUCH AS LIQUID CHLORINE, CONCENTRATED OXYGEN, SODIUM
HYPOCHLORITE, CALCIUM HYPOCHLORITE, ETC.
Stability Condition to Avoid:AVOID HEAAT, SPARKS, PILOT LIGHTS, STATIC
ELECTRICITY AND OPEN FLAME
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES, ALDEHYDES

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.